BODY AND STRUCTURE - USER CONTROLS AND SEAT Seat suspension system - Assemble (E.32.A.72 - F.10.A.20) AFX8010 Some illustrations show the pedestal removed from the foundation. It is not necessary to remove the pedestal in order to replace the shock absorber. This instruction includes two procedures that can be performed separately. Shock absorber assembly iin steps 1 - 3, and adjuster assembly steps4 - 10. Prior operation: Seat suspension system - Disassemble (E.32.A.72 - F.10.A.25) 1. Set the shock absorber (1) into place. Attach the barrel end of the shock absorber with pin (2) and clip (3) . Attach the rod end of the shock absorber with a pin and clip.
Remove the blocking material from the pedestal. 2. Work the bellows (1) over the pedestal and attach using plastic plugs (2) . 40015764a 1 40015758a 2 3. Install the plastic cover (1) . Install seat per Seat - Install (E.32.A.70 - F.10.A.15) 40015757b 3 9698 1 27/05/2004 E.32.A / 13