BODY AND STRUCTURE - USER CONTROLS AND SEAT 4. To install the adjuster proceed with steps 4 - 10. Attach the appropriate air lines to the adjusters as required. 5. Attach the two air lines (1) from the adjusters to the manifold at the bottom of the bellows. 40015772 4 40015765 5 6. Pass the cable (1) through the opening on the side to install the keeper and cable into the adjuster. 40015771 6 7. Pass the pin and grommets (1) through the looped end of the adjuster strap. Install the pin into the bottom of the pedestal and secure in place with screw that had been previously removed at (2) . 40015773 7 9698 1 27/05/2004 E.32.A / 14