Case IH AFX8010 — USER PLATFORM

BODY AND STRUCTURE - USER PLATFORM POWER SEAT CIRCUIT Wiring harness -- Electrical schematic frame 45 (A.30.A.88 -- C.20.E.45) Current travels across the fuse panel system buss bar to fuse F16. Current passes through fuse F16 and connector X074 pin A to connector X312 pin 1 of the seat adjustment switch S45. When the seat adjustment switch is moved to the “ON” position, current is sent from pin 2 of connector X312 to connector X313 pin A of the seat pump motor M26. The ground path to the motor is completed through connector X074 pin B to reach the cab floor ground location #3. This causes the motor to energize and pump air into the seat reservoir (raising the seat).

Releasing a check valve, which is controlled mechanically, lowers the seat assembly. E.34 / 4