Case IH AFX8010 — ELECTRICAL POWER SYSTEM

DISTRIBUTION SYSTEMS - ELECTRICAL POWER SYSTEM ELECTRONIC MODULES (CCM’s) The electronic modules are the “black boxes” that provide control on many of the functions of the combine. These functions may vary according to the options that are fitted on the combine. Inside these “black boxes” there is a processor, the ”thinking part” of the module, and inside some of them there is one or more memories, which may allow the module to store calibration values, the configuration of the vehicle (which optional tools or devices have been installed) and the error codes. 46 A processor has a series of pins, which are electrical contacts. There are three main types of pins:

for the inputs of the signals, for the outputs and for the processor supply. The processor, the memories and the link between them form the hardware of the module, its ”physical” part. Then some software is needed, to handle the communication between the processor and the memories and to manage the various signals going into and out of the processor. The software is designed to operate in a different way for every module, and is called functional code. 47 The electronic modules are often blamed as responsible for most of the problems of the modern vehicles, while they are for certain among the most protected parts of the vehicle.

In fact, the pins of the module are protected against spikes (high pulses) of current, and the signals are filtered by the hardware and by the software in input and in output to give the best handling of information. A.30 / 5AA