Case IH AFX8010 — ELECTRICAL POWER SYSTEM

DISTRIBUTION SYSTEMS - ELECTRICAL POWER SYSTEM COMBINE CONTROL MODULE (CCM) REMOVAL AND INSTALLATION The CCM’s are located under the storage box of the instructional seat. The instructional seat must be removed to access the CCM’s. The CCM’s should be disconnected from the harness before removing. The harness connectors are located under the cab floor. CCM IDENTIFICATION 2 1 3 10004693 48 INSTRUCTIONAL SEAT REMOVAL 1. Raise bottom cushion and attach strap 1. 2. Loosen two bolts, 2, at bottom of seat back. 3. Lift seat back assembly up and forward to remove from rear of cab. 1 4. Remove storage box 3.

3 50021851 2 49 REMOVAL OF CCM The connectors, 1, are located under the cab floor left of the center line of the combine. 1 50032238 50 A.30 / 5AD ITEM DESCRIPTION 1. CCM 1 2. CCM 2 3. CCM 3 (If equipped)