Case IH AFX8010 — ELECTRICAL POWER SYSTEM

DISTRIBUTION SYSTEMS - ELECTRICAL POWER SYSTEM To remove CCM Module: 1. Peel back connector boots, 1. IMPORTANT: Before removing, if connectors are not marked, label the connections for proper installation. 2 2. Unthread the captured connector screws, 2, and remove connectors. 3. Remove the two mounting nuts and lock washers, 3. 3 3 1 50032237 51 4. To disconnect connector,1, unthread captured screw, 2. t 5. Carefully remove module from combine. NOTE: It may be necessary to remove the seven screws, 3, from the base of the instructional seat to provide clearance to remove the CCM. 3 1 10004693 2 52 A.30 / 5AE