Case IH AFX8010 — FEEDING Feeder housing

CROP PROCESSING - FEEDING Feeder housing 16. You may now remove the large beveled gear (1) from the center shaft. 10034625A5 16 17. When the beveled gear is removed, you may remove the entire torque limiter shaft and remaining gear cluster from the housing. 10034626 17 18. Once the torque limiting shaft (1) with the gear cluster is removed, it can be dismantled by simply removing snap rings. 19. The bearing (2) remaining in the housing from the center shaft (1) can easily be removed by a soft drift and a dead blow hammer, or a press. The bearing must be driven from the output shaft side to the input shaft side. 10034626A5 18 9712 1 27/05/2004 K.25.E / 31