Case IH AFX8010 — FEEDING Feeder housing

CROP PROCESSING - FEEDING Feeder housing 24. Using a slide hammer with a threaded 10mm attachment remove both shafts (1) from the gearbox. 10034629A5 23 25. Be sure to rotate the shaft (1) a few degrees every time you pull to ensure there is no binding of the bearing in the housing. 10034632A5 24 26. Once the shafts are removed you can use a press to remove the bearings from the shafts. 10034634 25 27. Before removing the conveyor (2) and rock trap (1) drive gears from the housing, be sure to mark the orientation from which they were set in the housing. 10034634A5 26 9712 1 27/05/2004 K.25.E / 33