CROP PROCESSING - FEEDING Feeder housing 28. With the shafts out of the housing remove the rock trap (1) and conveyor (2) drive gears and spacers from inside the housing. 10034640A5 27 29. The drive gears and spacers may bind when coming out, slightly jiggle the gears to pull them out of the housing. 10034636 28 30. To remove the remaining bearings (1) from the housing use a slide hammer with a bent catch attachment on the end. Be sure to move the catch from side to side every time you pull to ensure no binding of the bearing in the housing. 10034637A5 29 9712 1 27/05/2004 K.25.E / 34