Case IH AFX8010 — FEEDING Feeder housing

CROP PROCESSING - FEEDING Feeder housing Idler roller - Install (K.25.E.57 - F.10.A.15) AFX8010 DANGER M184D - ALWAYS shut OFF engine, remove the key and engage feeder safety lock in position on lift cylinder before working under header or feeder. Failure to engage feeder safety lock may cause injury or death. 1. Install the feed drum (2) in the front of the feeder housing. Place a flat washer on the bolt (1) and feed through the support arm and the feeder housing. Install a bushing on the bolt between the feeder housing and the feed chain tensioning eye bolt. Secure with nut. 10032082A5 1 2. Connect the feed chain using the connection links (4) .

Install front shield (3) using bolts, washers, and nuts (1) . Tighten the two center bolts (2) . 10032078C5 2 Next operation: Adjust the feed chain tension as described in Feed chain - Tension adjust (K.25.E.48 - F.45.A.40) 9712 1 27/05/2004 K.25.E / 47