Case IH AFX8010 — FEEDING Feeder housing

CROP PROCESSING - FEEDING Feeder housing Idler roller - Clearance (K.25.E.57 - F.45.A.12) AFX8010 10032077A5 1 The feeder drum height support plate (1) has three positions: low position - down (shown) for small grains; high position - up for corn and other large grain; and mid position - sideways for edible beans, etc. 1. Loosen nut (1) approximately one turn. Rotate the bolt (2) to the desired position on both sides of the feeder, then tighten the nut (1) . Torque to 200 - 220 Nm ( 149 - 161 lb ft ). 10032076A5 2 Next operation: Feed chain - Tension adjust (K.25.E.48 - F.45.A.40) 9712 1 27/05/2004 K.25.E / 48