CROP PROCESSING - THRESHING Axial flow threshing 9. Remove the bolts (1) securing the bearing plate (2) . Remove the bearing plate securing the rotor. 10030050A4 6 10. Attach the tool mounting plate to the front of the rotor first by using the eyebolts (1) to secure it. IMPORTANT: Be sure the eyebolts are tight and the plate is secure to the rotor! If stress is placed on the rotor stub shaft it will result in damage to the rotor. 10030054A4 7 11. Install the rotor removal tool (1) (tool #380000806) onto a forklift. Remove the rear support brace (2) from the tool. 10030055A4 8 12. Attach the tool to the forklift using chains (1) . This is to ensure the tool will not slide off of the forklift.
10033724A4 9 9714 1 27/05/2004 K.40.C / 27