Case IH AFX8010 — THRESHING Axial flow threshing

CROP PROCESSING - THRESHING Axial flow threshing 13. Install bolt (1) through the flange (2) and through the tool. Tighten the bolt so the rotor is firmly attached to the tools mounting flange. 10033725A4 10 14. Use the forklift to align the rotor mounting flange on the tool with the rotor that is to be removed. 15. Remove the retaining bolt used in step 2, and the block of wood used in step 3 for the rotor to be removed. 16. Using the help of an assistant, remove the rotor from the combine. For every few inches the rotor is removed from the front of the combine, the rotor must be lowered a few inches.

Install the rear support brace (2) on the removal tool (1) once the rotor has been removed enough from the combine to allow installation to help aid in the support of the rotor. NOTE: Use care not to damage the cab platform with the rotor or forklift. 10030055A4 11 9714 1 27/05/2004 K.40.C / 28