Case IH AFX8010 — THRESHING Axial flow threshing

CROP PROCESSING - THRESHING Axial flow threshing Threshing rotor AFX (auger front) rotor - Visual inspection (K.40.C.52.52 - F.40.A.10) AFX8010 1. Inspect the front auger flights (1) of the rotor for damage or excessive wear. Replace any flights that are worn or damaged. Inspect the rasp bars (2) for damage or excessive wear. Replace rasp bars as a matched set, if damaged so rotor balance is maintained. Inspect the rotor body for dents, cracks, and wear from foreign objects. Repair or replace as necessary. Inspect the rotor blades (3) for damage or excessive wear. Replace the blades as necessary. Inspect the shaft to the rotor.

Check for scoring, pitting or any other damage or excessive wear to the shaft. Replace the rotor as necessary. 50033730A5 1 2. Inspect the bearing (1) in the front rotor housing (2) for smooth rotation. There should be no lateral play in the bearing. Replace bearings which do not rotate smoothly or have lateral play in them. 50033731A5 2 3. Inspect the front rotor plate for damage or wear. Check the seals on the plate and combine frame. Replace the plate seals if damaged. 4. Inspect the coupler on the rear of the rotor for damage or excessive wear. Replace the coupler if the teeth are damaged or worn.

If the outer coupler is worn, be sure to check the inner coupler located on the rotor gearbox. 9714 1 27/05/2004 K.40.C / 29