CROP PROCESSING - STORING AND HANDLING Grain storing 9. Remove lock nut and washer (1) remove pulley (2) and spacer and washer from idler arm. 40033211A5 8 10. Remove spring (1) and rotate idler arm (2) rearward out of the way. 40033212A5 9 11. Disconnect the wires for the auger shaft sensor (1) at the left hand side. Loosen two bolts (2) to remove sensor and cover. 12. Remove the central bolt (1) of the sensor plate and remove plate (2) . Remove bearing lock collar (3) . Loosen two nuts (4) and remove the bearing flange. Loosen the nut to remove cover (5) . 50037325A5 10 40033202A5 11 9716 1 27/05/2004 K.60.B / 18