CROP PROCESSING - STORING AND HANDLING Grain storing 5. To open the chain, remove pins (2) to remove coupler link (1) . To prevent the chain from slipping out of the elevator, fit a rope on both ends of the chain. 10031281A5 4 6. Remove nuts to remove cover (1) . 40033213A5 5 7. Remove lock collar (1) . Loosen nuts (2) and remove the outer bearing flange. Remove LH Service Platform and Shielding per Side shield - Remove (E.20.A.70 - F.10.A.10) . 8. To clear the area at the left end of the auger for removal, the cleaning system drive belt must be removed. To remove the belt, insert the square end of a Ѕ inch drive ratchet handle (1) into the square hole in the top of the idler arm (2) .
Pull rearward to extend the spring (3) and to produce slack in the belt (4) . Remove belt from the idler pulley and allow idler to move forward to relax the spring. 50037327A5 6 40033210B5 7 9716 1 27/05/2004 K.60.B / 17