CROP PROCESSING - STORING AND HANDLING Grain storing Clean grain cross auger - Remove (K.60.B.51 - F.10.A.10) AFX8010 1. To remove the clean grain cross auger, proceed as follows: Open cover (1) . 40033209A5 1 2. Loosen nuts (1) and remove the grain elevator intermediate shaft drive belt (2) . 20034728A5 2 3. Rotate the elevator chain until the coupler links are accessible on the bottom sprocket. 4. Release the chain tension with nuts (1) and (2) at the rear of the grain elevator. 10031282A5 3 9716 1 27/05/2004 K.60.B / 16