Case IH AFX8010 — STORING AND HANDLING Grain storing

CROP PROCESSING - STORING AND HANDLING Grain storing 8. Install the cable (1) on the pin (2) and extend the spring (3) so that it also hooks onto the pin. Install the washer and a .188X1.75 in ( 5X40 mm ) cotter pin (4) . 10041745B5 8 9. Grease the splines on the gearbox output shaft with CASE AKCELA PREMIUM GREASE EP-2 . Using an appropriate hoist, lower the bubble-up auger (1) into the auger tube and engage the splines on the output shaft. Install four M10x25 cap screws with lock washers and nuts (2) to retain the bearing support (3) to the auger tube (4) . 10037337B5 9 10. Install cover (1) and retain with thumb latch. 10034685A5 10 9716 1 27/05/2004 K.60.B / 15