Case IH AFX8010 — STORING AND HANDLING Grain storing

CROP PROCESSING - STORING AND HANDLING Grain storing 4. Install two M8x20 cap screws, lock washers and nuts (1) . 10041746A5 4 5. Install cross auger cover plate (1) to appropriate position as needed. 6. Install 50 mm ( 1.97 in ) key (1) in shaft of gearbox and install sprocket (2) . Align with drive sprocket on elevator and tighten two set screws. Assemble chain (3) and adjust idler (4) with nut (5) . 10021837B5 5 10034840B5 6 7. Install three M8x20 cap screws, lock washers and nuts (1) to retain the hinged covers over the auger tube. Raise the auger tube to the raised position and retain with latch. 10034685C5 7 9716 1 27/05/2004 K.60.B / 14