CROP PROCESSING - STORING AND HANDLING Grain storing 9. Remove two cap screws, lock washers, and nuts (1) that attach the top front lip of the elevator housing to the grain tank. 40037324A5 8 10. Disconnect harness (1) to monitors on elevator body, if so equipped. 40031054A5 9 11. Remove eight (8) cap screws with lock washers and nuts (1) to remove the right hand center side panel lower hinge support (2) from elevator. NOTE: It may be desirable to provide temporary vertical support for the side panel while the lower hinge support is disconnected. 12. Refer to Grain elevator Chain - Remove (K.60.B.52.48 - F.10.A.10) for instructions to remove the chain from the elevator.
40033208A5 10 9716 1 27/05/2004 K.60.B / 25