Case IH AFX8010 — STORING AND HANDLING Grain storing

CROP PROCESSING - STORING AND HANDLING Grain storing Grain elevator - Install (K.60.B.52 - F.10.A.15) AFX8010 1. To install the elevator assembly, proceed as follows: 2. Move elevator into position at right side of combine with a suitable hoist. Guide the front of the elevator head into the grain tank opening as the top of the elevator is moved forward and up slightly. Install two M10X30 cap screws (1) with lock washers and nuts to retain elevator to main support angle on rear of grain tank. Install bubble-up auger drive chain (2) and adjust idler (3) with nut (4) . 10034840E5 1 3.

Install two M8X20 cap screws, lock washers, and nuts (1) that attach the top front lip of the elevator housing to the grain tank. 40037324A5 2 4. Install lower elevator body and elevator chain. Refer to Grain elevator housing - Assemble (K.60.B.74 - F.10.A.20) and Grain elevator - Install (K.60.B.52 - F.10.A.15) . 5. Install eight (8) M8X25 cap screws (1) with lock washers and nuts to attach the center side panel hinge support to the elevator housing. 40033208B5 3 9716 1 27/05/2004 K.60.B / 27