Case IH AFX8010 — STORING AND HANDLING Grain storing

CROP PROCESSING - STORING AND HANDLING Grain storing 6. Connect elevator monitors harness (1) if so equipped. If top of elevator is equipped for grain flow sensor, install with four (4) M8X20 cap screws with lock washers and lock nuts (1) . Connect harness connector (2) after feeding it through the grommet just to the rear of the connector. 50030166B5 4 7. Install cover (1) . 8. Install right hand fan drives area screen and retain with two M8X20 cap screws, lock washers and nuts (1) . 10034685A5 5 40033204A5 6 9. Retain front of right hand fan drives area screen with two M8X20 cap screws and lock washers (1) . 40033205A5 7 9716 1 27/05/2004 K.60.B / 28