Case IH AFX8010 — STORING AND HANDLING Grain storing

CROP PROCESSING - STORING AND HANDLING Grain storing 4. Release the chain tension with nuts (1) and (2) at the rear of the grain elevator. 10031282A5 4 5. Rotate the elevator chain until the coupler links are accessible on the bottom sprocket. 6. Attach a rope to the chain at one side of the coupler link. The rope should be long enough to go fully around the elevator. Roll the chain around the sprockets until the end of the rope appears. Tie the other end of the rope to the chain on the other side of the coupler link to be opened. To open the chain, remove the “S” pins (2) to remove coupler link (1) . NOTE: If an offset link is chosen, only one pin will need to be removed. 10031281A5 5 7.

Open and remove cover (1) . 10030024A5 6 9716 1 27/05/2004 K.60.B / 35