CROP PROCESSING - CLEANING Primary cleaning 5. Turn the eccentric drive shaft until the drive arm is on the lowest leg of travel. Position the shaft key and center line of the drive arm perpendicular (90 degree angle) to each other. This is known as the neutral position. 20013967a-2 4 6. Lock or hold the shaft in the neutral position until instructed to release it. 7. Tighten the hardware for the drive or connecting arm bushing caps. 8. Release the lock or hold from the eccentric drive shaft. NOTE: Optional remotely operated sieves only. 9. The sieves with welded tabs (1) are manufactured to be installed on the left side of the shoe. 40015723 5 10.
Slide the appropriate sieves onto the lower shoe. Secure the sieves into place using the previously removed hardware (1) . 11. Attach the positioning mechanism (2) . 50013944a 6 9717 1 27/05/2004 K.62.B / 27