CROP PROCESSING - CLEANING Primary cleaning Fan - Assemble (K.62.B.52 - F.10.A.20) AFX8010 1. The discs must be assembled on the shaft with blade retaining holes inclined in the direction of rotation as shown. 50042970 1 2. The discs must be spaced on the shaft 361 mm ( 14.2 in ) apart from the inside edges of the discs to install the M8 x 75mm bolt to secure them to the shaft. 50042971 2 3. Torque the lock nut (1) to 10 - 15 Nm ( 7 - 11 lb ft ) . 50042969 3 4. The blades (1) are not to be installed straight. Blades are to be installed in a chevron pattern with center advanced in direction of rotation by two openings.
The blades will snap into place when they are fully inserted into the openings. 50042968A5 4 9717 1 27/05/2004 K.62.B / 37