CROP PROCESSING - CLEANING Primary cleaning Fan - Install (K.62.B.52 - F.10.A.15) AFX8010 1. Slide the fan housing assembly (1) under the machine from the right hand side where the platform was removed. 10041926A5 1 2. Raise the fan housing using two floor jacks in position (1) and position (2) with an assistant to evenly raise it into position. NOTE: Before installing fan back into machine, be sure seals are in good condition. Replace as necessary. 10042965A5 2 3. Install the four bolts loosely into the front (2) and middle (1) fan brackets on the left hand side of the housing. 40036385A5 3 9717 1 27/05/2004 K.62.B / 41