Case IH AFX8010 — ELECTRICAL POWER SYSTEM

DISTRIBUTION SYSTEMS - ELECTRICAL POWER SYSTEM If only part of the connector is shown, a wavy dotted line, 1, will be shown at one or both ends of the box to indicate that part of the connector is missing, and located in another frame of the schematic. The connectors will identify pins or sockets in each connector. 1 2 Bolted connections, 2, such as to batteries or alternators, will not have a dotted box surrounding the connection. In most cases, an entire component is shown on a single frame of the schematic. In some cases, however, the component (typically a computer module), 2, Figure 4, may be shown on several frames of the schematic.

If only part of the component is shown, a solid wavy line will be shown at one, or both ends of the component to indicate part of the component is missing, and is located in another frame of the schematic. 20010928 5 Machine Options In some cases, the wiring may have slight differences from one machine to another, depending on the specific options that are installed. In these cases, the schematic will show a reverse arrow head on one wire, with two or more arrow heads available to “plug in”. These arrow heads have a number in them to identify the specific option or configuration they represent. The arrow head options are listed at the bottom of the Index frame for reference.

20020069 6 The options used in the schematic are: BASE UNIT WITH MANUAL A/C EUROPEAN BASE UNIT BASE UNIT WITH MANUAL ATC NORTH AMERICAN BASE UNIT A.30 /190C