DISTRIBUTION SYSTEMS - LIGHTING SYSTEM Under shield service light - Overview (A.40.A.19 - C.10.A.10) AFX8010 Wiring harness - Electrical schematic frame 38 (A.30.A.88 - C.20.E.38) The AFX combine is equipped with two under shield lights on each side of the combine to allow for easier servicing and adjustment of the combine components. Current flows from the electrical system buss bar and passes through fuse F-34 and connectors X024 , and X342 to reach pin 2 of the Under Shield Light Switch (S-63). When the switch is moved to the "ON" position, current crosses from pin 2 to reach pin 1. Current exits pin 1 to reach a wire splice. The wire splice sends current to the following components:
LH Front Shield Light (E-42) LH Rear Shield Light (E-43) RH Front Shield Light (E-44) RH Rear Shield Light (E-45) Each of the components above are grounded at the Front Frame Ground Location #2, causing the lights to illuminate. 9668 1 27/05/2004 A.40.A / 26