Case IH AFX8010 — ELECTRONIC SYSTEM

DISTRIBUTION SYSTEMS - ELECTRONIC SYSTEM Alarm Messages The network is capable of diagnosing itself and generating alarm messages to the operator when problems are detected. The combine may continue to function when a network alarm message appears, but the systems re- lated to that module will no longer function. The alarm messages that are related to the CAN network are listed below. A.50.A / 106 Alarm Message Description/Symptom D0100 YMIU Not Detected The YMIU module was not present when the network powered up. D0101 YMIU Communication Lost The YMIU module has dropped “offline”. D0180 GPS Receiver Communication Lost The GPS receiver is not broadcasting on the network.

D2000 CCM1 Not Detected The CCM1 module was not present when the network powered up. D2001 CCM2 Not Detected The CCM2 module was not present when the network powered up. D2002 CCM3 Not Detected The CCM3 module was not present when the network powered up. D2003 RHM Not Detected The Right Hand Module (RHM) was not present when the network powered up. D2004 SSM Not Detected The Shaft Speed Monitor (SSM) was not present when the network powered up. D2005 GOV Not Detected The engine module (GOV) was not present when the network powered up. D2006 CCM1 Communication Lost The CCM1 module has dropped “offline”. D2007 CCM2 Communication Lost The CCM2 module has dropped “offline”.

D2008 CCM3 Communication Lost The CCM3 module has dropped “offline”. D2009 RHM Communication Lost The Right Hand Module (RHM) has dropped “offline”. D2010 SSM Communication Lost The Shaft Speed Monitor (SSM) has dropped “offline”. D2011 GOV Communication Lost The engine module (GOV) has dropped “offline”.