POWER PRODUCTION - ENGINE FIG_220 2 Main Data for Checking the Overpressure Valve Spring - 1. Load of 312 - 356 Nm ( 74.6 - 75.6 lb ft . 2. Load of 502 - 550 Nm ( 113 - 123.8 lb ft mid0481a 3 Oil Pressure Control Valve - Pressure of starting opening 5 bar ( 72.5 psi ). The oil pressure control valve is located on the left side of the crankcase.
ENGINE - Torque (B.10.A - D.20.A.10) AFX8010 ENGINE - Special tools (B.10.A - D.20.A.40) AFX8010 Refer to the following information units for details of your Special Tools Valve drive - Special tools (B.10.A.40 - D.20.A.40) Crankshaft - Special tools (B.10.A.43 - D.20.A.40) Connecting rod and piston - Special tools (B.10.A.47 - D.20.A.40) 9671 1 27/05/2004 B.10.A / 6 Screw securing engine lifting bracket to cylinder head M18x2 First phase: Pre-torque 120 Nm 88 lb ft Second phase: Angle closed 45 deg Screw securing engine lifting bracket to timing system gearbox M16x2 First phase: Pre-torque 100 Nm 73 lb ft Second phase: Angle closed 60 deg