Case IH AFX8010 — ENGINE

POWER PRODUCTION - ENGINE Flywheel - Special tools (B.10.A.50 - D.20.A.40) Cylinder block - Special tools (B.10.A.70 - D.20.A.40) Valve drive - General specification (B.10.A.40 - D.40.A.10) AFX8010 Intake Exhaust Valve-rocker arm clearance (with engine cold ): Ignition sequence:

1-4-2-6-3-5 Valve drive - Dimension (B.10.A.40 - D.40.A.30) AFX8010 Diameter of valve guide bores in the cylinder head Valve guide external diameter Valve guide internal diameter (after fitting) Valve guide and bore interference in head 9671 1 27/05/2004 B.10.A / 7 Valve drive Overhead valves operated by rocker arms via the camshaft located in the engine block; the camshaft is driven by the crankshaft using helical gears - Start: before T.D.C. 16 deg - End: after B.D.C. 32 deg - Start: before T.D.C. 51 deg - End: after B.D.C.

11 deg Valve-rocker arm clearance for timing check mm Intake 0.35 - 0.45 mm 0.014 - 0.018 in Exhaust 0.35 - 0.45 mm 0.014 - 0.018 in Start and clockwise rotation Balance valves of cylinder no. Adjust clearance of valves of cylinder no. Adjust preload of injectors of cylinder no. 1 and 6 at TDC 6 1 5 120 ° 3 4 1 120 ° 5 2 4 120 ° 1 6 2 120 ° 4 3 6 120 ° 2 5 3 14.980 - 14.997 mm 0.5898 - 0.5904 in 15.012 - 15.025 mm 0.5910 - 0.5915 in 9.015 - 9.030 mm 0.3549 - 0.3555 in 0.015 - 0.045 mm 0.0006 - 0.0018 in