Case IH AFX8010 — ENGINE

POWER PRODUCTION - ENGINE 17. Unscrew the screws (1) and remove the engine oil sump (2) , together with the spacer (3) and the gasket. 50034760A5 13 18. Unscrew the screws and remove the suction hose (1) . 50030332A5 14 19. Turn the engine block (1) , upright as shown in the Figure. mid0311a 15 20. Remove the screws (2) , attaching the connecting rod cap (3) and remove it. From the top of the engine block, take out the piston connecting rod assembly (1) . Repeat the same operation for the other pistons. IMPORTANT:

Keep the connecting rod half bearings in their housings and/or note their assembly position since, if they are to be reused, they must be fitted in the same position found in disassembly. mid0312a 16 9671 1 27/05/2004 B.10.A / 48