Case IH AFX8010 — ENGINE

POWER PRODUCTION - ENGINE Valve drive - Assemble (B.10.A.40 - F.10.A.20) AFX8010 1. Mount the camshaft, (4) , arranging it with the holes (see arrow at front of camshaft) positioned as shown in the figure to the right. Lubricate the ring seal (3) and fit it on the shoulder plate (2) . Mount the shoulder plate (3) , with the sheet metal gasket (1) and tighten the screws (5) , to the required torque. 2. Apply the gauge (1) . 380000167 . Check and adjust the position of the connecting rod (3) . For the transmission gear, lock the screw (2) , to the required torque. Refer to Connecting rod and piston - General specification (B.10.A.47 - D.40.A.10) mid0348a 1 mid0349a 2 3.

Fit the transmission gear (1) , back on and lock the screws (2) , with an appropriate hex wrench to the required torque. Refer to Connecting rod and piston - General specification (B.10.A.47 - D.40.A.10) mid0350a 3 9671 1 27/05/2004 B.10.A / 59