Case IH AFX8010 — ENGINE

POWER PRODUCTION - ENGINE Valve drive - Timing adjust (B.10.A.40 - F.45.A.64) AFX8010 1. Apply the tool for flywheel rotation to the gear box (2) ; 380000137 , (7) and spacer 380000138 (6) . IMPORTANT: The arrow indicates the direction of rotation of the working engine. With the above-mentioned tool, turn the engine flywheel (1) , in the direction of rotation of the engine so as to take the piston of cylinder No. 1 to approximately the TDC in the phase of combustion. This condition is accomplished when the hole with one notch (4) , after the hole with two notches (5) , on the engine flywheel (1) , can be seen through the inspection window (3) . mid0357a 1 2.

The exact position of the piston of cylinder No. 1 at TDC is obtained when, in the above-described conditions, the tool 380000150 (1) , enters the hole (3) , on the engine flywheel (4) , through the seat (2) , of the engine speed sensor. If this is not the case, orient the engine flywheel (4) , appropriately. Remove the tool 380000150 (1) . mid0358a 2 9671 1 27/05/2004 B.10.A / 62