POWER PRODUCTION - ENGINE 4. Apply Loctite 5699 sealant on the crankcase with an appropriate tool (1) , as shown in the Figure. The box contains a diagram for applying Loctite 5699 sealant. IMPORTANT: Fill the sub-crankcase within 10 minutes of applying the sealant. 260820031232243 4 5. Fit the sub-crankcase (1) , using a hoist and appropriate hooks. IMPORTANT: The sub-crankcase fixing screws of the engine must be lubricated with engine oil before assembly. 260820031232442 5 6. Screw down the screws (1) and tighten them according to the torques and phases shown in Crankshaft - Torque (B.10.A.43 - D.20.A.10) . 7.
The crankshaft end play is checked by placing a dial gauge (1) , with a magnetic base on the crankshaft (2) , as shown in the Figure. If the clearance is found to be greater than required, replace the rear main thrust bearing shells and check the clearance again. 270820031314267 6 260820031233140 7 9671 1 27/05/2004 B.10.A / 72