POWER PRODUCTION - ENGINE 15. With the extractor (2) , 380000120 applied as shown in the figure, extract the seal (4) . Unscrew the screws (3) and take off the cover (1) . Disconnect all electrical connections and sensors. mid0507a 15 16. Key the ring seal (1) , on to the crankshaft and then apply tool (2) , 380000126 . Screw the nut (3) , down to mount the ring seal (1) , completely in the cover. Fit the remaining parts back on following the reverse order used for disassembly. Upon completion, fill the cooling system with the required type and amount of coolant. mid0508a 16 9671 1 27/05/2004 B.10.A / 75