POWER PRODUCTION - ENGINE Connecting rod and piston - Disassemble (B.10.A.47 - F.10.A.25) AFX8010 IMPORTANT: Handle all parts carefully. Do not put your hands or fingers between parts. Wear suitable safety clothing - safety goggles, gloves and shoes. 1. Clean the parts thoroughly before doing any work and check the pistons carefully. If they show any signs of seizure, scoring, cracking or excessive wear, they must be replaced. 2. Remove the piston rings (2) , from the piston (3) , with the pliers 380000324 (1) . mid0417a 1 3. Remove the split rings (2) , holding the piston pin with round-nose pliers (1) . mid0418a 2 4. Remove the piston pin (1) .
If disassembly is difficult, use an appropriate drift. mid0419a 3 9671 1 27/05/2004 B.10.A / 81