POWER PRODUCTION - ENGINE Connecting rod and piston - Measure (B.10.A.47 - F.40.A.16) AFX8010 1. To measure piston diameter, use a micrometer (2) , to measure the diameter of the piston (1) and to determine the assembly clearance. IMPORTANT: The diameter has to be measured at the distance X from the base of the piston skirt: X = 19 mm ( 0.748 in ). 2. The pistons are selected in two classes A and B, according to the diameter. 3. As spares they are supplied in class A and can also be mounted in the cylinder liners with inside diameter class B. The clearance between piston and cylinder liner can also be measured with a feeler gauge. mid0420a 1 mid0421a 2 4.
Piston pins are mounted with clearance on both the small end and on the piston. Measure the diameter of the pin (1) , with a micrometer (2) . mid0422a 3 9671 1 27/05/2004 B.10.A / 82