POWER PRODUCTION - ENGINE 5. Certain conditions must be met for correct pin-piston coupling. When fitting new pins (1) , check that they couple correctly with the seat on the piston in the following manner: lubricate the pin and seat on the piston pin bosses with engine oil; holding the pin upright, insert it into the piston pin bosses; the pin must slide in by simply pressing it and the pin must not slip out of the bosses on its own. mid0423a 4 6. The figure to the right contains data for piston, piston rings and pin. (* is measured on O 120 mm ). See also Connecting rod and piston - Dimension (B.10.A.47 - D.40.A.30) . mid0424a 5 7.
Check the thickness of the piston ring (2) , with a micrometer (1) . mid0426a 6 8. Check the clearance between the ring seals (2) and their seats on the piston (1) , with a feeler gauge (3) . mid0427a 7 9671 1 27/05/2004 B.10.A / 83