POWER PRODUCTION - ENGINE Connecting rod and piston - Visual inspection (B.10.A.47 - F.40.A.10) AFX8010 1. On the body of the connecting rod, in position "A", there are three markings: a letter specifying the weight classes, A = 3973 - 4003 g ( 8.76 - 8.83 lb ), B = 4004 - 4034 g ( 8.8 - 8.89 lb ), C = 4035 - 4065 g ( 8.9 - 8.96 lb ), Number specifying the selection of the diameter of the big end bearings at: 1 = 87.00 - 87.010 mm ( 3.4252 - 3.4256 lb in ), 2 = 87.011 - 87.020 mm ( 3.4256 - 3.4260 lb in ) 3 = 87.021 - 87.030 mm ( 3.4260 - 3.4264 lb in ) Numbers identifying the cap rod coupling. The number specifying the class of the diameter of the half-bearing seat may be:
(1) , (2) , or (3) . Determine the type of big end bearing shell to fit on each pin, following the guidelines in the following tables. mid0406a 1 2. Refer to the crankshaft and bearing chart in figure 2 . mid0404a 2 9671 1 27/05/2004 B.10.A / 87