Case IH AFX8010 — FUEL AND INJECTION SYSTEM

POWER PRODUCTION - FUEL AND INJECTION SYSTEM FUEL AND INJECTION SYSTEM - General specification (B.20.A - D.40.A.10) AFX8010 Fuel is supplied via a fuel pump, fuel filter and prefilter, six pump-injectors governed by the camshaft by means of rocker arms and by the electronic control unit. A - Fuel inlet; B - Fuel delivery; C - Bypass nut; D - Fuel return from the pump-injectors and E - Pressure relief valve (opening pressure: 5 - 8 bar ( 72.5 - 116 psi ). mid0493a 1 Cross-section view of the Fuel Pump. (1) Oil or fuel leakage gauge.

The pump injector is composed of a pumping element, nozzle and solenoid valve; (1) diesel/oil ring seal, (2) diesel/diesel ring seal and (3) diesel/exhaust gas ring seal. The pumping element is operated by a rocker arm that, in its turn, is directly governed by the cam of the camshaft. The pumping element can ensure a high delivery pressure. Its return stroke is activated by a spring. The fault diagnosis program of the control unit checks the operation of each injector by deactivating each injector, one at a time, and checks the capacity of the other five. Fault diagnosis makes it possible to distinguish between errors of an electrical origin from those of a mechanical/hydraulic origin.

It indicates broken pump injectors. It is therefore necessary to interpret all the control unit’s error messages correctly. Any defects in the injectors require them to be replaced as no repairs are permitted. 9672 1 27/05/2004 B.20.A / 5