Case IH AFX8010 — FUEL AND INJECTION SYSTEM

POWER PRODUCTION - FUEL AND INJECTION SYSTEM FUEL AND INJECTION SYSTEM - Special tools (B.20.A - D.20.A.40) AFX8010 Refer to the following information units for details of your Special Tools Fuel injector - Special tools (B.20.A.29 - D.20.A.40) Fuel filter system - Torque (B.20.A.24 - D.20.A.10) AFX8010 Fuel injector - Dimension (B.20.A.29 - D.40.A.30) AFX8010 Fuel injector - Torque (B.20.A.29 - D.20.A.10) AFX8010 9672 1 27/05/2004 B.20.A / 7 Screw securing fuel pump to flywheel cover box M8x1.25 (16 - 22 Nm) (141 - 195 lb in) Injectors Pump electro-injectors governed by the camshaft and controlled by the electronic control unit BOSCH type PDE 31 12 Volt Nozzle:

BOSCH type DLLA 140 Number of nozzle holes 8 Nozzle hole diameter 0.21 mm (0.0083 in) Pressure setting 290 - 302 bar 4202 - 4379 psi Injection pressure 1500 bar 1,750 psi Injection sequence Fuel pump Gear pump Gear operated Operated via the engine timing system Fuel filtering Via mesh filter in the tank, sediment pre-filter, replaceable cartridge filter on the delivery line to the injectors-pump Electronic injection type BOSCH EDC MS6.2 Injector protrusion 1.14 mm (0.0449 in) 1.4 mm (0.0551 in) Screw for injector fixing brackets (Before assembly, lubricate with engine oil) M8x1.25 26 Nm 230 lb in Screw securing thrust plates to the head M8x1.25 19 Nm 168 lb in Screw securing fuel filter to cylinder head 108x1.5 34 - 40 Nm 300 - 354 lb in