Case IH AFX8010 — FUEL AND INJECTION SYSTEM

POWER PRODUCTION - FUEL AND INJECTION SYSTEM Fuel injector - Preload (B.20.A.29 - F.45.A.30) AFX8010 1. To adjust the preload on pump injector rocker arms: Loosen the nut locking the rocker arm adjustment screw (1) and pump injector rocker arm screw (2) . Loosen the adjustment screw to take the pumping element to the end of its travel. Using a torque wrench, tighten the adjustment screw to a torque of 5 Nm (0.5 kgm [ 44 lb in ]). Unscrew the adjustment screw by 1/2 - 3/4 of a turn. Tighten the locknut. IMPORTANT:

To make the above-mentioned adjustments correctly, you must follow the sequence given in the table in Valve drive - General specification (B.10.A.40 - D.40.A.10) , checking correct positioning at each phase of rotation with pin 296192 to be inserted in the 11th hole of each of the three sectors of 18 holes each. 9672 1 27/05/2004 B.20.A / 30