Case IH AFX8010 — AIR INTAKE SYSTEM

POWER PRODUCTION - AIR INTAKE SYSTEM Air cleaner - Cleaning (B.30.A.25 - F.30.A.10) AFX8010 1. The filter element should only be cleaned when there is an alarm stating "Air filter blocked" (625 mm) (24 - 5/8" vacuum)" on the display monitor in the cab. 20034854 1 2. To remove the air cleaner element, remove cover by loosening clamps. 20030145 2 3. Remove the primary filter from housing. Do not let dirt fall on the safety filter. IMPORTANT: Do not remove safety element unless it is to be replaced. 50030146 3 4. To clean the element, hold the top and tap it against the palm of the other hand to remove the dust. Never tap it on a hard surface or you can damage the filter. 5.

When tapping does not remove the dirt, direct compressed air through the element, from the inside towards the outside. NOTE: Never blow compressed air from the outside to the inside of the filter because particles can become embedded or lodged in the filter and later be released into the engine causing damage. 9673 1 27/05/2004 B.30.A / 11