60 CHAPT ER THRE E IDLE SPEED AD~USTMENT (2GM , 2GM20 . 3GM , 3GM30 , REMOTE CONTROL 3HM AND 3HM35 MODELS) AD~USTMEN T (lGM AND lGM10 MOD E LS ) /- ::::>: k- --= 1'I- - Jamn ut I d~ speed screw REMOTE CONROL AD~USTMENT (2GM, 2GM20 , 3G M, 3GM30 , 3HM AND 3HM3S MODELS) 4. Adjust the idle speed screw until the engine idles at 825-875 rpm. then retighten the locknut. 5. On engines equipped with remote control, measure the gap between the cable end fitting (A, Fi gur e 37 or "'i gur e 38) and lever fitting (B). The specified gap is 1-3 mm (0.04-0.12 in.). To adjust the gap, rotate the nut (C) on the cable. T I-tANSM ISS IO ]\: Transmission Oil Transmission moaet ... K.U1A, KJU2C.
KJ flp, Kllf1 A and Ki\- fJ P The recommended transmission oil is an engine oil that meets API classification cc. The recomm end ed viscosity is IOW-30. Change the transmission oil after every 250 hours of operation. Transmission mod el " KB JJ'I OD and KB W/ OЈ The recommended transmission oil is automatic trans- mission oil (ATF). The oil must be classified a Dexron oil. Change the transmission oil after every 250 hours of oper- ation.