Yanmar — Yanmar Diesel Inboard Shop Manual for One, Two, and Three Cylinder Engines

SINGLE-CYLINDER ENGINES 89 \ ,-" 5 Outer rotor ~'L/ ~ - B O d Y .->-"'--\ , f- - Feeler gauge Do not attempt to disassemble the oil pressure relief valve. The valve is scaled and it must be replaced as a unit assembly. . ~~~~,;::,;::=:} ~ Straightedge Oi/pi ckup Body The oil pickup (A, Fi gur e 67) is located in the oil pan (B). The pickup includes a strainer to prevent foreign mat- ter from entering the lubrication system. A spring (C) keeps the pickup in position in the oil pan. Feeler gauge NOTE When removing the drain plug ill/he oilpan, he aware thai the spring willforce the plug oul when the threads disengage. Remove the drain plug (D) for access to the oil pickup.

Pres sure relief valve FLY WHEEL An oil pressure relief valve is threaded into the front (timing gear) of the engine (Figure 66). When oil pres- sure exceeds 300-400 kPa (43-57 psi), the relief valve opens and expels oil into the timing gear area. Removal/I nstallation 1. Remove the engine from the boat. 2. Remove the transmission.