DDEC IV TESTING Intermittent Black Smoke Perform the following steps for Intermittent Black Smoke . 1. Check for diagnostic trouble codes. [a] If Fault Codes are logged, diagnose the logged codes first. 2. Visually inspect the air filter restrictions. [a] If the air filter is clogged or dirty, replace the air filter. 3. Visually inspect the air inlet hoses for soft or collapsed areas. [a] If the air inlet hoses are damaged, replace as necessary. 4. Visually inspect the air inlet for restrictions. [a] If the air inlet has restrictions, clean as necessary. 5. Perform Test A . Page 5–7. 6. Perform Exhaust Gas Recirculation System Basic Checks. . Page 5–9. 7.
Test drive the vehicle with DDDL and perform a snapshot. Analyze the snapshot. 8. Perform Test B . Page 5–8. 5-2 All information subject to change without notice. (Rev. April 2004) 7SE60 0404 Copyright © 2004 DETROIT DIESEL CORPORATION