Kaiyi HR25/30T-9 — 제목없음

After turning on the Diesel engine and running it until the hydraulic oil has reached opera- ting temperature (i.e. approx. 50 degrees Celsius), roller operation can be started. Deactivate the parking brake ( 4 ). Make sure the corresponding light in the switch goes out. Move the frequency lever ( 2 ) into position B or C (roller operation). The Diesel engine reaches the engine speed required for roller operation or vibration. A Bowden cable connects the joystick ( 1 ) to the travel pump. Depending on the direction of motion, the Bowden cable adjusts the control valve for the control oil pressure.

The control oil pressure sets the adjusting disk of the travel pump to the direction of motion (forward/reverse travel). The further the joystick ( 1 ) is moved, the more the control oil pressure to the adjusting disk is boosted. The travel pump swivels out further, which leads to an increase in the fl ow rate and the roller speed. Drum drive 7 - 5 Issue: 01-10 3 1 A C 2 B 3 7.1.4 Sequence of functions 1 4