After starting the roller operation (i.e. the tandem roller moves forward or backward), you may activate the vibration according to your speci fic requirements. By means of the selector switch vibration mode ( 2.1 ), set the vibration to MAN = manual or Auto = Auto stop. Move the frequency lever (2.3 ) from position A to position B or C to establish the required vibration frequency. In order to start the vibration, push the red button Vibration on/off ( 2.4 ) on the joystick ( 1 ). Pull the joystick ( 1 ) in your direction and move it forward in order to drive forward or backward for reverse travel.
Select either front drum vibration or combined front & rear drum vibration by actuating the drum selector switch ( 2.2 ). Vibration system 8 - 5 Issue: 01-10 MAN 2.4 8.1.4 Sequence of functions: Vibration 1 2.3 Auto C 2.4 2.3 2.1 2.2 B 1 A ON N ON OFF 2.1 OFF