BAIC — Bus and Public Transportation

194 Chapter 15 Bus and Public Transportation Another interesting area that is experiencing massive growth in electrification is the realm of public transportation. There are many drivers for this growth, including the demand to improve air quality in urban areas, reducing fuel costs, and improving rider experience. And like much of what we have discussed in this book, electric buses and light rail systems are not an entirely new idea.

In cities such as New York and San Francisco during the early twentieth centuries, most of the public transportation was provided either by electric streetcars and for a short period from the late 1890s to the early 1920s also from electric buses (Kirsch, 2000). The one factor that is beginning to become clear to fleet operators is the reduction in fuel costs that can be achieved through electrification. If you consider that the typical diesel-powered bus gets between 3 and 6 miles per gallon depending on vehicle size, route (cycle), and the fuel type, that makes fuel costs just about the biggest expense that the municipality will incur on an annual basis (after the initial capital expense).

Reports (Clark, Zhen, Wayne, & Lyons, 2007) have indicated that the average municipal bus will operate for just under 40,000 miles per year. If we do some simple calculations based on this, we find that the average bus will burn about 10,000 gallons of diesel fuel per year (assuming 4 mpg) which then equates to about $38,430 USD in annual fuel costs for a single bus. If we assume that the municipality has at least 10 busses in their fleet, then the annual fuel costs will be about $384,300 USD.

By the addition of either a hybrid, plug-in hybrid, or even an electric battery system into the vehicle, we could expect to achieve about 20% fuel savings for a hybrid and up to about 50% for a plug-in hybrid system. That means that the operator of that fleet could see savings for a plug-in type hybrid system of up nearly $200,000 annually or nearly $2 million over the 10-year life of the fleet. Additionally, as we continue to see increases in major urban population centers, which are also experiencing major increases in pollution due to internal combustion engine-type vehicles, there are increasing demands for greater amounts of electrified public transportation.

Everywhere in the world this demand is centered on the major urban cities such as San Francisco, New York, Beijing, Shanghai, Tokyo, London, Paris, and many other major cities as they evolve into megacities. Modern examples of the electric bus include companies such as Proterra who is developing an all-electric bus that is designed from the ground up to be an electric alternative to traditional powered buses.

Companies that are developing electric and hybrid buses include major systems integrators such as BAE Systems and Allison Transmissions, system integrators and major manufacturers such as New Flyer, Gillig, BYD, Wrightbus, Volvo, Novabus, Yutong, Lian Fu, Zhong Tong, and many others are all developing electrified bus applications. The battery for an electric bus will vary depending on a couple of considerations. First, is it a fully electric bus or is it a hybrid or plug-in hybrid electric-powered bus? For an all-elec- tric bus, we should then ask whether or not it is expected to fast charge during its operating cycle?

If the bus is expected to charge frequently during its operational shift, it is important